Fully Automatic Concrete Batching Plant With Dust Collecting System Easy Operation
Parameters of Mortar Mixing Line:
| Capacity | 30-80th(depending on applied formula) |
| Production Circle | 3-5minutes |
| Assumed Bulk Material Density | 1.4kg/m3 |
| Number of Circles/Hour | 15-20(depending on applied formula) |
| Sand Dosage Tolerance | ±1% |
| Power Dosage Tolerance | ±1% |
Brief Descriptions of Dry Mix Mortar Plant:
The 10tph workshop type dry mortar mixer include the follwing parts: sand bucket elevator, cement silo, screw conveyor, sand doser, cement doser, mixer, final product storage hopper, valve bag packer.
The premix dry mortar plant work process is as follow:
Put the classified dry sand into the inlet of bucket elevator, hoist the sand into the sand doser, dosing the cement, put the additives into the mixer from the additive hopper, which is onto the mixer, after mixing, discharge the final product into the storage silo, then flow into the packer, pack into small bags.
During the dry mortar mixer is running, the bucket elevator hoist the sand into doser, wait for next batch. The cement screw work at the same time.The whole system work continuously.
Features of Dry mix mortar production line:
The dry mix mortar production line is composed of the systems of drying and screening of raw materials, mixing and dust-removing.
We can provide one-stop service from design to installation according to our customers' specific requirement.
It features magnificent appearance, good quality, high productivity and accurate mortar proportioning.
The dry mix mortar production line uses a centralized control system, making the equipment easy to operate.
Main Components of Rednering Plaster Mortar Plant:
| Item | Equipment | Functions |
| 1 | Material in-charge hopper | for charging material to bucket elevator. |
| 2 | Bucket elevator | Lifting materials to pre-mix silo. |
| 3 | Double shaft non-gravity mixer | uniform mixing of materials, special paddle sets suitable for fiber mixing. Big double door could accelerate material discharge uniformly, paddle sets are optional according different type material. |
| 4 | Finished product silo | for storing finished material and secondary mixing of pre-packing material. Finished product silo is available for connecting automatic metering packer and manual discharging valve |
| 5 | Automatic metering packer | packing finished product by automatic weighing, high accuracy. |
| 6 | Pulse dust catcher: | absorb the dust during production process, mainly used for de-dust from material in-charge hopper and packer. |
| 7 | Control cabinet | includes instrumentation and PLC control for controlling electrical switch of the whole production lines. |
| 8 | Compressor | Produce compressed air for the whole air compressing system |
