Concrete Skim Coat Equipment And Dry Mix Plaster Mortar Production Line
Parameters of Skim Coat Mix Plant:
| Model | Semi automatic dry mortar plant |
| Output | 5-8t/h |
| Components | bucket elevator, twin shaft mixer, holding tank, packing machine, control cabinet, air compressor |
| Occupied area | 50-60m2 |
| Total power | 24-28kw |
| Mixer volume | 2m3 |
| Equipment height | 6-8m |
| Man power | 3-4person |
Product Application:
Dry mortar, also known as ready-mixed mortar.screening process is dried aggregate (eg quartz sand), inorganic cementitious materials (such as cement) and additives (such as polymers), etc. By a certain percentage of a physical mixture kinds of granular or powdered material. In bags or in bulk transport to the site, the material after mixing with water can be used directly. Also known as the mortar dry powder, dry blend, mix dry powder.
Main features:
1) Ingenious materials distribution system supports a bucket elevator distributive operations, thus avoiding the waste of resources.
2) The sensor data in real-time feedback to ensure that all material measurement precision.
3) Intelligent continuous operation, 3-5 workers can be done, small dust, high efficiency, up to 80-120 tons;if required, high capacity, can increase the number of weightlessness mixer, such as the configuration of two agravic mixer, daily production can reach more than 200 tons.
4) Multiple mixing procedure, uniformity, and no material segregation phenomenon.
5) The effect of dust, low noise, in line with national environmental requirements.
