
Add to Cart
Bolted Cement Silo also called cement bin storage silo, widely used in mobile cement mixing plant for road building, house building, bridge building, port transportation, etc.
This cement silo is composed of steel sheets connected through bolts, it is very easy to assemble and disassemble. The experienced workers can finish the cement silo installation through the installation video or installation instruction.
This bolted cement silo is available for 50ton, 100ton, 200ton, 300ton, 500ton, 1000ton. The final size is designed according to local site requirements based on the local environment, so each cement silo solution is unique for customer.
Serial Number | Model and size | Diameter (mm) | Number of layers | Leg distance (mm) | Theoretical capacity (m3) |
1 | MD50T | 3100 | 3 | 2020 | 40.67 |
2 | MD60T | 3100 | 4 | 2020 | 52.13 |
3 | MD100T | 3100 | 7 | 2020 | 86.52 |
4 | MD150T | 3300/3800 | 6--8 | 2180/2570 | 111.74/114.96 |
5 | MD200T | 4500 | 6 | 3010 | 164.27 |
6 | MD300T | 5000 | 7 | 3290 | 234.85 |
7 | MD400T | 5700 | 8 | 2640 | 348.14 |
8 | MD500T | 6500 | 8 | 3015 | 458.36 |
9 | MD800T | 8000 | 8 | 3660 | 700 |
1. After the storage bin is fixed, the cement is transported by the bulk cement truck to the construction site, and then the conveying pipeline of the bulk cement truck is connected with the feeding pipeline of the cement silo (cement tank), and the gas pressure of the bulk cement truck will be The cement in the tank is transported into the cement silo (cement tank).
2. In the process of transporting cement into the storage bin, the operator should uninterruptedly press the button of the vibration motor of the precipitator to shake off the cement attached to the bag of the dust collector to prevent the bag from being blocked and the warehouse to be exploded.
3. through the high and low material level can be observed the warehouse full and lack of material.
4. When it is necessary to release the cement, first open the manual discharge valve at the bottom of the cone and then transport the cement through the cement conveyor. In the process of discharging, if the phenomenon of “arching” occurs, press the button of the electromagnetic valve of the arching device in time to blow the air, eliminate the “arching” and feed, and ensure the smooth supply of cement.
1. The overall performance is good, long life
The cement silo produced by our company is completely constructed by special equipment. When the coil is made, the outer wall of the silo is bitten to 5 times the thickness of the material, and the spiral ribs are 30 to 40 mm wide. The load capacity of the silo body is greatly enhanced. The warehouse material can be configured according to the degree of corrosion resistance and grinding strength of the storage material to make the normal service life far exceed the service life of other warehouses.
2. The airtight performance is good, the use is wide
The special equipment for the roll warehouse is used for bending and biting to ensure the quality of any part of the warehouse body. Therefore, the cement silo is sealed in particular, and can store various ultra-fine powder materials, and can prevent moisture and penetration.
3. The construction period is short and the cost is low
On-site construction, installation speed is extremely fast, and the construction period is extremely short. The warehouse is made of thin steel plate, the weight is greatly reduced, and the cost is greatly reduced.
4. High intensity
The continuous spiral undercut is five times thicker than the thickness of the base metal, and the load-carrying capacity and strength are greatly enhanced.
5. Less floor space, light weight
The height diameter of the silo can be arbitrarily selected within a large range, and the pitch is small, and the space can be fully utilized. The weight of the silo body is only 1/6 of the same volume concrete silo, which is the same as the steel bar weight of the same volume concrete silo, which greatly reduces the infrastructure load and the cost of building the warehouse.